The wiring for your steering bridge is hidden in the front bar. To access the relevant cables, first remove the cover underneath your display. and the clamp fastening of the handlebar. Here you can see all the plug connections that connect the displa
First remove the right engine cover to unplug the tail light. To do this, loosen the three screws and then carefully remove the cover so as not to damage any cables. The mudguard is held by two screws on the left and right. Once these two are loosene
If your folding mechanism is very stiff or has some play, you can fix it yourself. The fine adjustment is made using the hook at the end of the handlebar. First loosen the large screw inside the mechanism. Then adjust the angle of the hook using the
If your suspension starts making noise after the first few miles, there is no need to worry. To eliminate these noises, first remove the engine cover on both sides. Now you can see the fastening of the polymer elements. To eliminate the noise, you ca