VMAX Escooter USA logo
VMAX Escooter USA logo

All articles

Changing the display coverUpdated a month ago

Required Tools: 

  • Allen key 2.5 mm
  • Allen key 3 mm
  • Allen key 5 mm
  • small Phillips screwdriver

To remove the display cover, start by pushing both decorative tubes located on either side of the display mount to the side. Do this by loosening the brake lever on the left side. Don’t completely loosen the screws - just loosen them enough so that you can move the elements on the handlebars.


Release the thumb throttle and brake lever on the right side. 

Now all 4 screws of the display cover are exposed. Remove the screws and put on a new cover.

Remove the cover and install a new one. 

Was this article helpful?
Yes
No