Controls and indicatorsUpdated 2 months ago

• Allen key 2.5 mm
• Allen key 3 mm
• Allen key 5 mm
• Scissors
• Insulating tape or shrink tubing
• Hot air dryer or lighter

The wiring for your steering bridge is hidden in the front bar. To access the relevant cables, first remove the cover underneath your display.  

and the clamp fastening of the handlebar. 

Here you can see all the plug connections that connect the display to the individual controls and the electronics at the heart of the scooter. Disconnect the corresponding plug connections here. To hide the cable back inside the handlebar at the end, disconnect all elements on the corresponding side of the handlebar. 

You will find a clamping screw on the underside of the handle bar

Before you attach new elements, prepare the shrink tubing if necessary and place it over the plug connections.
Then reattach all elements to the handlebar and insulate the plug connections.

Now reattach the handlebar under the steering head and mount the front light cover and the light itself.