VMAX Escooter USA logo
VMAX Escooter USA logo

All articles

Front LightUpdated 10 months ago

Required Tools:

  • Allen key 2.5 
  • Knife or scissors
  • Shrink tubing
  • Hot air dryer or lighter
  • OPTIONAL: Allen key 3 mm

Loosen the screw that holds the light.

Pull the light forward out of the cover. If the cable gets caught, you can optionally remove the light cover.

Use a sharp object to carefully cut open the shrink tubing. Be cautious to avoid damaging the cable. Unplug the light. Before plugging in a new light, slide the shrink tubing over the plug.

Once the new light is plugged in, secure the shrink tubing using a heat gun or lighter. CAUTION: Do not let the tubing get too hot to avoid damaging the connector.

Push the cable back into the steering head.

Screw the light back in place.

Was this article helpful?