MotorUpdated 11 days ago
It you need to replace the entire motor or just the casing mounted on the engine, follow these steps carefully. Ensure you have the following tools and materials ready:
Required Tools:
- Open-end wrench 21 mm
- Allen key 2.5 mm
- Allen key 3 mm
- Phillips screwdriver
- Optional: spray adhesive or hot glue
- Optional: Thread (2m)
Removing the motor
- Remove the front few centimeters of the rubber mat on your running board.
- Remove the maintenance flap on the front by loosening the two screws at the top and bottom of the running board.
- Disconnect the four cables leading to the motor.
- Attach the thread to the motor cable.
- Remove the engine cover on both the left and right sides.
- Loosen the motor axle and the retaining plates. Be careful not to let the motor fall, carefully take it away.
Now you have removed the motor. To install a new motor, follow these steps in reverse order. The thread attached to the motor cable will help guide the cable through the cable channel more easily.